PBX calls logging and analysing
 about  news  authors  search
 download  faq  links  forum
 demo
  documentation
   PBX setup
   cable pinout
   software setup and configuration
   updating
   using ATSlog
   uninstalling
 site map  russian
Cable pin-out

you can find additional pinout schemes here , or here .

Panasonic KX-TD1232
Panasonic KX-TD816
Panasonic KX-T1232
Panasonic KX-T616
Panasonic VB-9
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
1 gnd 1
2 2 3
3 3 2
4 7 4
5,6 4 20
7 5 7
20 1,6,8 5,6,8

 

Panasonic KX-TD1232RU
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
1 FG ? 1 FG
2 SD(TXD) 2 RD(RXD) 3 RD(RXD)
3 RD(RXD) 3 SD(TXD) 2 SD(TXD)
4 RS(RTS) 8 CS(CTS) 8 CS(CTS)
5 CS(CTS) 7 RS(RTS) 20 ER(DTR)
6 DR(DSR) 4 ER(DTR) 20 ER(DTR)
7 SG 5 SG 7 SG
20 ER(DTR) 6 CR(DSR) 5 CS(CTS), 6 DR(DSR), 8 CD(DCD)

 

Panasonic KX-TA308
Panasonic KX-TA616
It is reported that in the PBX Panasonic KX-TA616 pinoutit is necessary to switch 7-th and 8-th pin from the PC part (9 pin female)
PBX (9 pin female) PC (9 pin female) PC (25 pin female)
2 3 2
3 2 3
4 6 5,6,8
5 5 7
6 4 20
7 7 -
8 8 20

 

Panasonic KX-TA616. One more tested and proven pinout.
PBX (9 pin female) PC (25 pin female)
2 2
3 3
4 6
5 7
6 20
7 5
8 4

 

Panasonic KX-TD500
Panasonic KX-T336
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
1 gnd 1
2 2 3
3 3 2
6 4 20
7 5 7
20 6,7,8 5,6,8

 

Panasonic DBS-96
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
1
?
1
2
?
3
3
?
2
5,6,8
?
20
7
?
7
20
?
5,6,8

 

Samsung NX-1232.
The unit SCC has a switch which can take positions "loopback" and "RS232". Set it into RS232.
PBX (9 pin) PC (9 pin female) PC (25 pin female)
2 3 2
3 2 3
5 5 7
8 4 20

 

Samsung SKP-56HX
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
1 gnd 1
2 3 2
3 2 3
7 5 7

 

Samsung SKP-816H
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
2 3 2
3 2 3
4 7 5
6 6 6
7 5 7
20 4 20

 

Samsung DCS
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
2 3 2
3 2 3
7 5 7
20 4 20

 

Siemens Hicom 130
PBX (25 pin male) PC (9 pin female) PC (25 pin female)
7 5 7
2 2 3
3 3 2
4 8 20
5 7 5

 

Siemens Hicom 150E
PBX (25 pin male) PC (9 pin female)
8 1
2 2
3 3
6 4
20 6
5 7
4 8
7 5
22 9

 

AT&T Merlin systems
PBX (RJ45 - 8 pins) PC (DIB25 male 25 pins)
2 6,8
3 20
4 7
5 3
6 2

 

LG GHX 46
LG GHX 1232
LG GHX 1832
PBX (25 pin) PC (9 pin female) PC (25 pin female)
2 3 2
3 2 3
4 7 4
5 8 5
6 6 6
7 5 7
8 1 8
20 4 20

 

LG GDK-100
LG GDK-162
If the CTS signal transfer is allowed (switch 2 on the MPB board is OFF) then an additional cable is to be switched. Port parameters:8 bit, w/o parity, 1 stop bit
(comment: there is nothing said about flowcontrol there).
For outputting the information on cals the program PGM62 is used.
Button 2 - allow print output
Button 4 - allow print output for incoming calls
Button 6 - setting port rate
PBX (9 pin) PC (9 pin) PC (25 pin)
2 (TX) 2 (RX) 3 (RX)
3 (RX) 3 (TX) 2 (TX)
5 (GND) 5 (GND) 7 (GND)

 

DCS Laboratory Office series
PBX (9 pin female) PC (9 pin female) PC (25 pin female)
2 3 2
3 2 3
5 5 7
6 4 20

You can find additional pinout schemes here , or here .


Previous Sections Next
PBX setup   program setup

Valid HTML 4.01 Transitional   BerliOS Developer Logo   Valid CSS!